PAMSPAN501x G.SHDSL.bis EFM Gateway
-
65
4. Once the table is configured, click
. The table is
refreshed and the reserved mapping is added to the NAT configuration.
To delete a reserved mapping setup, click the Delete hyperlink, and then click
.
Click
Return to Interface List
to display the Security Interface Configuration page.
3.2.4.1.8
Configuring Firewall policies
To configure firewall policies, click
Security Policy Configuration
from
the
Policies,
Triggers and Intrusion Detection
page, as shown in the following figure.
The
Security Policy Configuration
table will then be displayed which contains
details of each Firewall policy.
The policies can now be configured to include portfilters and validators.
A portfilter is an individual rule that determines what kind of traffic can pass
between two interfaces specified in an existing policy.
To configure a portfilter:
1. From the
Current Security Policies
table, click the
Port Filters
link for the policy
that is to be configured. The page displayed contains three
Add Filter
hyperlinks
that allow three different kinds of portfilter to be created:
• For a TCP/UDP port filter, click
Add TCP or UDP Filter
. The following page will be
displayed:
