Italjet Dragster 2022, Руководство по обслуживанию

Страница: 26 / 165

Warning
- Use only the brake fluid specified in the
specification; otherwise, the rubber seal may break,
leading to leakage.
- Fill with brake fluid of the same type. Adding brake
fluid other than DOT4 can cause harmful chemical
reactions
- When filling, avoid water or dust infiltration into the
brake fluid storage reservoir. Water can significantly
reduce the boiling point of the liquid and may cause
“vapor locking”, and dirt can clog the valve of the
ABS hydraulic unit.
Warning
Brake fluid may damage painted surfaces or plastic
parts. Be sure to clean up any spills immediately.
With the wear of the brake pads, it is normal for the brake
fluid level to decrease gradually. If the brake fluid level is
low, the brake pads may be worn and/or the brake circuit
may be leaking. Therefore, it is important to check the
wear level of the brake pads and the brake circuit for
leakage.
If the brake fluid level drops suddenly, have your
Jincheng dealer inspect your motorcycle before
continuing to use it.
Replace the Brake Fluid
Let your
Jincheng
dealer change the brake fluid every
two years. In addition, the seals on the main cylinder
and brake caliper, as well as the brake hoses, should be
replaced at intervals listed below if damaged or leaked.
- Brake seals: replacement every 2 years
- Brake hose: replacement every 4 years
Check the CVT Belt
CVT belts must be inspected and/or replaced by your
Jincheng dealer at the intervals specified in the regular
maintenance schedule.
26