Italjet Dragster 2022, Руководство по обслуживанию

Страница: 18 / 165

- Screw in the screw (3).
- Pour the engine oil into the tank through the hole (8)
Dosage: 1000 cm
3
(first injection)
950 cm 3
（
for replacing the engine oil and filter
）
900 cm 3
（
only for replacing the engine oil
）
Reassemble the dipstick by tightening it (1).
Note: For the type of oil to be used, see the “Oiling”
section.
Note: After the engine and exhaust system are cooled,
clean the parts with cleaning cloth.
- Start the engine and let it idle for a few minutes to
check for oil leaks. In case of oil leaks, stop the engine
immediately and find the cause.
- Shut off the engine, check the oil level and correct if
necessary.
- Reset the maintenance intervals as described in the
“Digital instruments”section.
Check Coolant Level
Note: Check coolant level after engine cooling.
- Keep the motorcycle in driving position (place the
front and rear wheels on the same horizontal plane on
the ground, and make them vertical on both sides) or
park it with a central kickstand.
- Remove the observation cover (1) of the water storage
tank (2).
- Check whether the liquid level is between the
minimum “MIN” and maximum “MAX” levels of the
tank.
18