Italian Gelato CETEAM 1927 STARGEL 12, Инструкция по эксплуатации

Страница: 25 / 29

STARGEL
Stargel - 2018/04 - rev. 03
- 25 -
EN
ATTENTION
When reassembling the fins on the
beater, pay attention to position them
correctly
(see figure).
5.7.1 Stuffing box
On disassembling beater also check wholeness of stuffing box; depending on machine operation
length, it is necessary to replace it through the spare one to be found in the accessory kit inside
machine packing.
• Remove beater assembly
• Remove stuffing box from its seat
• Lubricate spare stuffing box
• Mount the new stuffing box
• Clean and lubricate the old stuffing box and put it away for recovery of its elasticity.
IMPORTANT
Stuffing box must be replaced with an original spare part each time ice cream drops are found on
withdrawing drip drawer placed at the machine side.
Keeping on operating the machine after finding ice cream drops brings about a bigger leakage
from stuffing box, thence a malfunctioning of the machine which consequently affects production.
CAUTION
When you do not use the machine, leave beater lid open in order to avoid stuffing box buckling.
5.8 FRONT LID DISASSEMBLY
•
Lift lid locking lever and shift it towards right.
•
Open the lid by rotating it on its hinge.
•
Remove lid while lifting it.
•
To carry out cleaning operations, remove all movable parts and seal with barrel.
•
Wash all parts previously disassembled with water and cleaning/sanitizing solution, then rinse.
•
Reassemble all parts previously disassembled, minding to grease the OR and the support rif.
362 with a film of edible fat.
289
960
363
7A
338
726
502
1126 304
501
290
350
362
291A