Italian Gelato CETEAM 1927 STARGEL 12, Инструкция по эксплуатации

Страница: 24 / 29

STARGEL
Stargel - 2018/04 - rev. 03
- 24 -
EN
5.5 OUTSIDE CLEANOUT
Clean the machine from dust and material its has been strewed with before shipment. Use water
only and add a mild detergent, such as soap and a smooth cloth.
5.6 PRELIMINARY CLEANOUT
With machine off and beater front lid closed, let water in the barrel.
Select the function
CLEANOUT
and let the beater run the least in order avoid a useless wear of
sliding shoes and cylinder.
Drain all water from the cylinder, open its lid so as to remove the beater.
5.7 BEATER DISASSEMBLY
Remove beater with care, so as not to damage it.
WARNING
Carry out this operation with utmost care, since beater may be damaged in case it falls to
the ground.
To reassemble the beater, hold it with both your hands and deeply push and rotate it so as to insert
the shaft into its seat thoroughly.
•
Remove the stuffing box from its seat on the beater shaft pos. 28.
• Wash the parts disassembled with water and cleaning/sanitizing solution; rinse.
• Reassemble the parts and grease the stuffing box with a film of edible fat.
430
028
1101
021
5.4 HOW TO USE CLEANING/SANITISING SOLUTION
Prepare a solution of water and sanitising detergent following the instructions shown on the
label of the product being utilised.
Washing/sanitisation by immersion of components
- Manually remove the bulk residues utilising the supplied brushes
- Remove finer residues with a jet of water
- Immerse the parts to be cleaned into the solution
- Let the solution react for the time indicated on the label of the product being utilised
- Rinse the parts with care, using plenty of clean drinking water