IMPORTANT - SAFETY REQUIREMENTS
Do not use the device in hazardous environments, such as in presence of flammable substances or explosive gases.
USE IN SAFE AREA
ONLY
.
Do not repair or modify the unit. It may cause fire, electrocution or damage. Please contact ITALCOPPIE SENSORI srl service to fix the product.
This product must be used by a qualified person
ABSOLUTE MAXIMUM CONTIDITIONS (To exceed may cause damage to the unit): Ambient temperature (0÷50°C), Humidity ( 10÷90% RH non condensing)
May ‘22 Rev.1.03
Cod. IMB193
S E N S O R I
ITALCOPPIE SENSORI srl
Via A. Tonani, 10
26030 Malagnino (CR) - Italy -
www.italcoppie.com
Before using this product, to avoid injury or damage to customers, third parties and /or properties and to ensure the correct use of the product, it is required
to carefully read, understand and observe the safety requirements and following rules.
Please check on the web site
products.italcoppie.it
if it is available an updated version of this document. it is also possible download the CE declaration of conformity
EVOPLATFORMSET
INTRODUCTION GUIDE
UK
At the end of its working life the product
must not be disposed as urban waste.
Dispose the product according to the
local rules and regulations.
- All rights of this document belong to ITALCOPPIE SENSORI srl. It is prohibited to use, duplicate and/or modify either a part or the entire structure of this document without permission.
- Please follow the safety requirements carefully. ITALCOPPIE SENSORI srl declines any responsibility for any safety problems connected to improper use of this product.
- ITALCOPPIE SENSORI srl accepts no responsibility for any malfunction and / or problems related to improper handling and/or misuse of this product. The warranty does not cover
damage caused by such behaviors.
- Figures and images in this manual are for illustration purpose only and may not accurately reflect the actual product.
- ITALCOPPIE SENSORI srl takes no responsibility for any damage caused by the use of this product, be it indirect, special, incidental or consequential damages (including loss of profits).
- Specifications, design and other contents outlined in this manual are subject to change without notice.
Warranty clauses
1
. This product is guaranteed to be free from defects in materials and workmanship for a period of one (1) year from the purchasing date. In case of product failure happened in specified working conditions and
during the specified warranty period,
will either repair or replace the unit and the customer is free of charge. ITALCOPPIE SENSORI will not accept product return for any other reason than
ITALCOPPIE SENSORI srl
defects noticed during the warranty period. ITALCOPPIE SENSORI will not accept any product that has been inappropriately used.
2
.
This warranty is strictly limited to repair or replacement operations for defective product.
gives no other warranty, and will not accept liability other than the expressly stated herein.
ITALCOPPIE SENSORI srl
Specifically,
will not accept liability for direct, indirect, special, consequential or incidental damages arising from the use of this product.
ITALCOPPIE SENSORI srl
1.0 General information
The EVOPLATFORMSET unit allow to configure the EVO series devices (EvominiX, EvominSER, EvoWL) through
a PC with Windows 10® (or higher) operating system and the EVOPlatform software. The kit includes the adapters cables.
2.0 Kit installation
-Install the EVOPlatform software downloadable from
https://products.italcoppie.it/products/evoplatformset-en/
(refer to the manual code
IMB220
downloadable from the same above link)
-Connect the kit to a free USB port on the PC and wait for the communication driver to be installed. All the EVOPlatform
functionalities are described in the enclosed help.
-The kit provides power to the connected device
3.0 Precautions
-Connect only one device at a time to EVOPLATFORMSET kit
-EVOPLATFORMSET kit must be used only to program the Italcoppie’s devices above listed. The improper use with
third-parts devices may cause the kit to break or malfunction.
Before connecting EVOPLATFORMSET kit to the USB port of the PC, install the EVOPlatform
software and its USB driver.
Connection to PC
USB port
EVOPLATFORMSET
programming
interface
Connection to device
EvominiX Scat
adapter cable
EvominiX series
EvominiSER series
EvominiX-Scat series
ATTENTION
Do not power the device
when it is connected
with EVOPLATFORMSET kit
EVO
SET
PLATFORM
EvoWL-Tx
adapter cable
EvoWL-Tx
Wireless T
emperature System
EVOWL
Connection with devices other than
the above will cause breakage of the
EVOPLATFORMSET kit
35.00
50.00
15.00
30
1780
Mechanical dimensions in mm
