background image

The Crestron®

FT2A-CBLR-1T series

FlipTop™ One-Touch Cable

Retractors provide an assortment of retractable cables for use with the
FT2-ELEC assembly cable management systems (not included). Each
model features a retractable cable that may be pulled out up to 5 ft
(1.52 m). When the cable retractor button on the included module is
pressed, the cable retracts gently back into its retractor enclosure.

The FT2A-CBLR-1T series retractor attaches to the side of the assembly
underneath the table. Each FT2A-CBLR-1T series pass-through module is
1.97 x 1.97 in. (50 x 50 mm) and occupies two module spaces in the
FT2-ELEC assembly.

FT2-ELEC assembly and FT2A-CBLR-1T Series Retractor

In the Box

1

FT2A-CBLR-1T Series, FlipTop™ One-Touch Cable Retractors

Additional Items

FT2A-CBLR-1T-4K-DP and FT2A-CBLR-1T-4K-DP-HD Only

1

DisplayPort™ pass-through module (4526967)

FT2A-CBLR-1T-4K-MDP-DP and FT2A-CBLR-1T-4K-MDP-HD Only

1

Mini DisplayPort pass-through module (4526968)

FT2A-CBLR-1T-4K-USBC-HD Only

1

USB Type-C® pass-through module (4526983)

FT2A-CBLR-1T-AUDIO Only

1

Stereo audio pass-through module (4526980)

FT2A-CBLR-1T-CAT6 Only

1

LAN pass-through module (4526981)

FT2A-CBLR-1T-HD Only

1

HDMI® pass-through module (4526361)

FT2A-CBLR-1T-USB Only

1

USB 2.0A adapter (2053204)

1

USB pass-through module (4526982)

FT2A-CBLR-1T-USBC-PWR Only

1

Reclosable fastener strips (2 pieces together) (2005411)

1

USB Type-C pass-through module (4526983)

FT2A-CBLR-1T-VGA Only

1

VGA pass-through module (4526969)

1

FT2A-CBLR-1T Series

Quick Start

FlipTop™ One-Touch Cable Retractors

Содержание FlipTop FT2A-CBLR-1T Series











Отзывы: