background image

 

30

Common to weather forecasting, absolute accuracy cannot be guaranteed. The weather 
forecasting feature is estimated to have an accuracy level of about 75% due to the varying 
areas the Weather station has been designed for use. In areas that experience sudden 
changes in weather (for example from sunny to rain), the Weather station will be more 
accurate compared to use in areas where the weather is stagnant most of the time (for 
example mostly sunny). 

 

If the Weather station is moved to another location significantly higher or lower than its initial 
standing point (for example from the ground floor to the upper floors of a house), discard the 
weather forecast for the next 12-24 hours. By doing this, the Weather Station will not mistake 
the new location as being a possible change in air-pressure when really it is due to the slight 
change of altitude.  

 

WEATHER TENDENCY INDICATOR 

Working together with the weather icons is the weather tendency indicators (located on the 
left and right sides of the weather icons). When the indicator points upwards, it means that 
the air-pressure is increasing and the weather is expected to improve, but when indicator 
points downwards, the air-pressure is dropping and the weather is expected to become 
worse. 

 

Taking this into account, one can see how the weather has changed and is expected to 
change. For example, if the indicator is pointing downwards together with cloud and sun 
icons, then the last noticeable change in the weather was when it was sunny (the sun icon 
only). Therefore, the next change in the weather will be cloud with rain icons since the 
indicator is pointing downwards. 

 

Note:

 

 

Once the weather tendency indicator has registered a change in air pressure, it will remain 
permanently visualized on the LCD. 

 

AIR PRESSURE HISTORY (ELECTRONIC BAROMETER WITH BAROMETRIC 
PRESSURE TREND) 

The third section of the LCD also shows the relative air pressure value and the air pressure 
history. 
 
 
 
 

 
 

The bar chart indicates the air pressure history trend over the last 24 hours in 7 steps, 0h, -
3h, -6h, -9h, -12h, -18h, and -24h. The “0h” represents the current full hour air pressure 
recording. The columns represent the “hPa” (0, ±2, ±4, ±6) at specific time. The “0” in the 
middle of this scale is equal to the current pressure and each change (±2, ±4, ±6) represents 
how high or low in “hPa“ the past pressure was compared to the current pressure. 

 

If the bars are rising it means that the weather is getting better due to the increase of air 
pressure. If the bars go down, it means the air pressure has dropped and the weather is 
expected to get worse from the present time “0h“. 

 

Note:   

For accurate barometric pressure trends, the Weather Station should operate at the same 
altitude for example, it should not be moved from the ground to the second floor of the 
house. Should the unit be moved to a new location, discard readings for the next 12-24 
hours. 

 
 
 

Air pressure over the last 24 hours 

Содержание WEATHER STATION

















Отзывы: