iSystem IOM6 CAN/LIN, Руководство пользователя

Страница: 13 / 20

CAN cable DB9
Ordering code IC57040-CAN-DB9
The IC57040-CAN-DB9 is used to connect the IOM6-CAN/LIN to an existing CAN network
through the DB9 connector. 120 Ohm termination is selected with the switch located on one of
the DB9 connectors. The cable length is 1m.
The DB9 connector with the termination switch must be connected to the IOM6 CAN/LIN
Accessory (CAN1 or CAN2).
The pinout of the target side DB9 connector is as follows:
DB9 pin Signal
1 NC
2 CAN_L
3 CAN_GND
4 NC
5 SHIELD
6 NC
7 CAN_H
8 NC
9 NC
SHIELD GND