iSystem IOM6 ADIO, Руководство пользователя

Страница: 7 / 20

Specifications
GENERAL
Operating temperature 10°C to 40°C
Storage temperature -10°C to 60°C
Humidity
5% to 80% RH
MECHANICAL
Size 100 x 125 x 55 mm
Weight ca. 440 g
ELECTRICAL
Supply voltage Powered through the FNet
Digital I/Os
DAP_RESET 2 x NXP TJA1027 (galvanic isolation)
I/O group D0, D1
·
2 x 8 channels configurable Input or Output operation
·
47Ohm serial termi 47kOhm pull-down
·
Sampling rate 100MHz
·
Supported operating voltage: 1.66V – 3.6V
·
Voltage threshold: CMOS for operating voltage below 2V and
LVTTL for operating voltage 2V or higher
Refer to Texas Instruments SN74AVC8T245 datasheet for more
details on the VIL, VIH characteristics.
I/O group D2, D3
· 2 x 8 channels configurable Input or Output operation
· 47Ohm serial termi 47kΩ pull-down
· Sampling rate 20MHz
· Supported operating voltage: 1.66V – 5.4V
· Voltage threshold: CMOS for operating voltage below 2V and
above 4.5V, in between can be considered LVTTL.
Refer to Texas Instruments SN74LVC8T245 datasheet for more
details on the VIL, VIH characteristics.
Input sampling rate
All 32 inputs are sampled on any input edge detection and every 8ms
when no edge is detected within 8ms time window.
Input edge detection
Edge detection: Short non-periodic changes at min. 16ns width or
periodic signal up to 1MHz frequency.
Analog I/Os
AOUT0, AOUT1
Two analog outputs, 12-bit resolution, output range ±5V, settling time
250ns
Output drive capability 35mA and 30pF load.
Protection: 33Ohm serial termination
AIN0, AIN1
Two analog inputs, input impedance 530kOhm / 8pF, 12-bit
resolution, input range ±5V, max. sampling rate 12 MHz
Power Sense
10-pin IDC connector
Provision for target power consumption measurement via the
optional iSYSTEM Power Probe (Ordering code IC50012).