background image

IOM6 ADIO

IOM6  ADIO 

-  A  part  of  the  IOM6  product  line  and  extends  the  functionality  of  the  iC5700

BlueBox,  enabling  the  monitoring  of  analog  and  digital  signals  synchronous  to  program
execution information. This allows network activity and code execution to be  examined  side-
by-side within our development software winIDEA. 
The  IOM6  ADIO  provides  two  analog  inputs,  two  analog  outputs  and  up  to  24  digital
inputs/outputs,  which  for  example  can  be  effectively  used  for  automated  Hardware-In-The
Loop (HIL) testing. 
Provided inputs  make  possible  measuring  power  consumption  of  the  Embedded  system  or
part of it. Using digital inputs, optional SPI Protocol Analyzer is available for easy monitoring
of  two  SPI  interfaces  within  the  embedded  target  either  alone  or  in  conjunction  with  the
program execution.

winIDEA 

- Integration Development Environment (IDE) delivers  the  visual  insights  required  to

debug  your  embedded  application.  At  the  simplest  level,  winIDEA  provides  all  the  usual
functionality of an IDE (breakpoints, stepping and device programming). Supported by a target
microcontroller, winIDEA can also visualize the timing  and  code  coverage  of  the  application
via the trace interface,  as  well  as  combine  data  captured  by  the  IOM6  Accessories.  Various
third-parties also  provide  software  tools  to  perform  advanced  worst-time-execution  analysis
based upon the data winIDEA can  export.  When  a  Real-Time  Operating  System  (RTOS)  is  in
use,  the  state  of  the  RTOS  and  its  tasks  can  also  be  visualized.  More  information
isystem.com/winideaide.

testIDEA

  -  testIDEA  environment  simplifies  the  development  of  unit  tests  for  embedded

applications. By  making  use  of  the  winIDEA  environment,  this  application  makes  it  easy  to
locate source code functions and generate test cases for them. Tests are then executed using
the  Original  Binary  Code  (OBC)  method,  testing  the  object  code  running  on  the  target
microcontroller. The tests, which are  stored  as  YAML  files,  can  easily  be  added  to  a  project,
maintained  in  a  repository,  and  then  automatically  executed  together  with  Continuous
Integration (CI) tools such as Jenkins. More information isystem.com/testidea.

isystem.connect 

- There are times when it is more efficient to write a script to execute  a  task

that requires many clicks within a visual development environment. This is where our Software
Development  Kit  (SDK)  isystem.connect  comes  in.  The  well-documented  interface  provides
access to Python, Java, and other languages so that any action available within winIDEA and
testIDEA can be scripted. Scripts can also  be  executed  directly  from  within  winIDEA,  thereby
allowing the developer to extend its functionality. More information isystem.com/sdk.

iSYSTEM's solutions run under Microsoft® Windows®, GNU, Linux OS; or optionally within the
Eclipse environment via a plugin. Software can be downloaded from the Downloads  page  at

http://www.isystem.com

.

Содержание IOM6 ADIO





















Отзывы: