search for the network within reach.
Step 3: if join successful the indicator will stay solid light, otherwise the indicator is unlit.
Step 3: Device pairing as a gas keeper or a water keeper (Binding)
After the device has successfully joined to the network, the next step is to pair the device
with other device so that the paired device can control the keeper as required.
User may configure SGZA10 as either
a gas keeper
or
a water keeper
. Configuration is
described in
Restore to factory setting
in the manual.
As a
gas keeper
, SGZA10 is a controllable device which receive command signal from a
zone device i.e. upon receive a smoke alarm, it changes the position of the leaver.
So pair
SGZA10 with a smoke/gas detector.
As a
water keeper
, the device can be controlled wirelessly from a paired remote controller.
So pair SGZA10 with an On/Off remote controller.
The pairing operation is the same for both types, except for the types of device to pair
with.
Operation:
1. On the SGZA10, hold press the binding key for 3 seconds to send bind request to the air.
2. Likewise, do the same on the other device to exchange pairing request. (refer to its
user manual for device pairing procedure)
When binding is unsuccessful the indicator will give 10 fast flashes. If successful it will
give 5 slow flashes.
