5
5
iSysmart
Step2. Power on SGZ825C. It will start to search and join the network.
Step3. The Network Indicator flashes
cyan
twice when it finds a network to join.
Step4. The Network Indicator stays
cyan
after it is joined successfully.
5-2. Permit-Join
SGZ825C is designed to work as a router. To allow other devices to join the ZigBee network, users
could enable the Permit-Join feature using the tips:
A.
Press the Binding Key to enable the Permit-Join feature. The Network Indicator will flash
cyan
per second.
B.
The default Permit-Join period of time is 60 seconds.
SGZ825C allows up to 14 End Devices to join its network.
Note:
Please remove the touch panel cover to press the binding key.
5-3. Binding
SGZ825C can be bound with the On/Off device such as ISysmart SGZ501.
Step1. Press and hold the Binding Key for 3 seconds. The Network Indicator will flash cyan once.
Step2. Release the Binding Key and then short press the Binding Key N times (EP1/L1: once;
EP2/L2;twice; EP3/L3: three times ) within 5 seconds. For example, press the Binding Key 3
times when you would like to bind Button 3.
Step3. Enable the binding feature of the On/Off device.
Step4. The Network Indicator flashes cyan 5 times after the binding is completed; otherwise, it will
flash cyan 10 times.
Note:
It supports 36 binding rules/ 36 groups/ 32 scenes
5-4. Control
A. Remote Control
Users are able to use the device which is bound with SGZ825C to control it.
While the switch is ON, the indicator shows green.
While the switch is OFF, the indicator shows yellow.
B.
Touch Panel Control: Users also can control SGZ825C via the touch panel.
C.
Backlight of tough key:
The backlight of touch keys can be adjusted from range 0x00 ~ 0xFE. Users can
press binding key for
6
seconds (the green light flash twice on 3
rd
and 6
th
second.) to turn on /off backlight of touch keys .
