background image

16 

 

FCC Statement: 

 

This  device  complies  with  part  15  of  the  FCC  Rules.  Operation  is  subject  to  the  following  two 
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any 
interference received, including interference that may cause undesired operation. 

 

This  equipment  has  been  tested  and  found  to  comply  with  the  limits  for  a  Class  B  digital  device, 
pursuant  to  part  15  of  the  FCC  Rules.  These  limits  are  designed  to  provide  reasonable  protection 
against  harmful  interference  in  a  residential  installation.  This  equipment  generates,  uses  and  can 
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may 
cause  harmful  interference  to  radio  communications.  However,  there  is  no  guarantee  that 
interference  will  not  occur  in  a  particular  installation.  If  this  equipment  does  cause  harmful 
interference to radio or television reception, which can be determined by turning the equipment off 
and  on,  the  user  is  encouraged  to  try  to  correct  the  interference  by  one  or  more  of  the  following 
measures: 

 

—Reorient or relocate the receiving antenna. 

 

—Increase the separation between the equipment and receiver. 

 

—Connect  the  equipment  into  an  outlet  on  a  circuit  different  from  that  to  which  the  receiver  is 
connected. 

 

—Consult the dealer or an experienced radio/TV technician for help. 

 

Caution:  Any  changes  or  modifications  not  expressly  approved  by  the  party  responsible  for 
compliance could void the user's authority to operate the equipment. 

 
 
 
 

 

Содержание SGZ308


















Отзывы: