ISYGLT LS-05-HF-WH, Технические данные/Инструкция по эксплуатации

Страница: 6 / 8

6
Seebacher GmbH www.seebacher.de Phone: +49 (0) 80 41 / 77 77 6
Marktstrasse 57, 83646 Bad Tölz info@seebacher.de Fax: +49 (0) 80 41 / 77 77 2
10.2. Address setting
Due to its design, the sensor does not provide space for the usual DIP switch for address setting. At this sensor, the address is set via software
parameterisation with the ISYGLT ProgramDesigner.
Display and buttons at the sensor
State Meaning / Function
LED red
slow flashing Sensor has no address
fast flashing Sensor is in programming mode
Off Sensor has a BUS address
individual In BUS operation, the LED is freely programmable, e.g. motion active.
Button right Activating the programming mode, actuation with a small screwdriver or plastic, e.g. small cable tie
Button left Deactivating the programming mode
Terminal Designation
+ Operating voltage
- Operating voltage
A Subnet BUS A
B Subnet BUS B
10.1. Pin assignment