background image

T

he

 

reference

 

in

 

surface

 

TreaTmenT

www.istsurface.com

3

 

                                

DC/DCM100 to 330 Dust Collector - Instruction Manual & Parts

InTRODUcTIOn

Welcome to the ISTblast® family of sandblasting products. This booklet contains helpful information 

and acquaints you with the operation and maintenance of your equipment. Please read carefully 

and follow our recommendations to assure trouble free operation. If you have any questions, please 

do not hesitate to contact your distributor or our technical service. 

1.  Carefully inspect the shipping carton for any signs of transport damage. The damage to the carton often 

indicates possibility of transport damage to the equipment inside.

2.  Carefully remove your  ISTblast dust collector from the shipping carton and skid.

3.  Check your equipment immediately to ensure that it is free of transport damage. Report any transport 

damage to the carrier without delay for possible claim procedures. ISTblast is not responsible for damage to 

equipment after it leaves our warehouse.

4.  Check the equipment received and compare it with the parts you have received. If any parts are missing, 

contact the supplier you purchased the equipment from.

Before operating the  ISTblast  dust collector, read this Instruction Manual completely. All  ISTblast  products are 

engineered and manufactured to the highest performance standards and have been subjected to detail testing 

before shipment from the factory.

Page

Содержание ISTblast DC 100

















Отзывы: