background image

T

he

 

reference

 

in

 

surface

 

TreaTmenT

www.istsurface.com

www.istsurface.com

4160 Industriel Blvd.

Laval, quebec

H7L 6H1 Canada

T : 1 877 629-8202

F :   450 963-5122

info@istsurface.

2019-01-17

ISTblast is a registered  

trademark of  

International Surface Technologies

 

ISTblast 

 warrants all equipment led in this manual which is manufactured by  ISTblast  and bearing its 

name, to be free from defects in material and workmanship on the date of sale by an authorized  ISTblast  

dristibutor to the original purchaser for use. Notwithstanding any special, extended or limited warranty 

published by  ISTblast  will, for a period of TWELVE (12) months from the date of sale, repair or replace any part 

of the equipment determined by  ISTblast  to be defective. This warranty applies only when the equipment 

is installed, operated and maintained in accordance with  ISTblast ’s written rISTblastmmendations.

This warranty does not cover, and  ISTblast  shall not be liable for general wear and tear, or any malfunction, 

damage or wear caused by faulty installation, misapplication, abrasion, corrosion, inadequate or improper 

maintenance, negligence, accident, tampering, or substitution of non- ISTblast  component parts. Nor 

shall  ISTblast  be liable for malfunction, damage or wear caused by the incompatibility with  ISTblast  

equipment with structures, accessories, equipment or materials not supplied by  ISTblast , or the improper 

design, manufacture, installation, operation or maintenance of structures, accessories, equipment or 

materials not supplied by  ISTblast .

This warranty is conditioned upon the prepaid return of the equipment claimed to be defective to an 

authorized  ISTblast  dristibutor for verification of the claimed defect. If the claimed defect is verified,  

ISTblast  will repair or replace free of charge any defective parts. The equipment will be returned to the 

original purchaser, transportation prepaid. If the inspection of the equipment does not disclose any defect 

in material or workmanship, repairs will be made at a reasonable charge, which charges may include the 

costs of parts, labor, and transportation.

THIS WARRAnTY IS eXclUSIVe, AnD IS In lIeU OF AnY OTHeR WARRAnTIeS, eXPReSSeD OR IMPlIeD, 

InclUDInG bUT nOT lIMITeD TO WARRAnTY OF MeRcHAnTAbIlITY OR WARRAnTY OF FITneSS FOR A 

PARTIcUlAR PURPOSe.

ISTblast ’s sole obligation and the buyer’s sole remedy for any breach of warranty shall be as set forth 

above. The buyer agrees that no other remedy (including, but not limited to, incidental or consequential 

damages for lost profits, lost sales, injury to person or property, or any other incidental or consequential 

loss) shall be available. Any action for breach of warranty must be brought forward within one (1) year of 

the date of sale.

ISTblast  MAKeS nO WARRAnTY, AnD DISclAIMS All IMPlIeD WARRAnTIeS OF MeRcHAnTAbIlITY 

AnD FITneSS FOR A PARTIcUlAR PURPOSe, In cOnnecTIOn WITH AcceSSORIeS, eQUIPMenT, 

MATeRIAlS OR cOMPOnenTS SOlD bUT nOT MAnUFAcTUReD bY  ISTblast 

. These items sold, but not 

manufactured by  ISTblast  (such as electric motors, switches, hose, etc.), are subject to the warranty, if any, 

of their manufacturer.  ISTblast  will provide the purchaser with reasonable assistance in making any claim 

for breach of these warranties.

lIMITATIOn OF lIAbIlITY

In no event will  ISTblast  be liable for indirect, incidental, special or consequential damages resulting from  

ISTblast  supplying equipment hereunder, or the furnishing, performance, or use of any products or other 

goods sold hereto, whether due to a breach of contract, breach of warranty, the negligence of  ISTblast , 

or otherwise.

Report all accidents or “near misses” which involve  ISTblast  products to:

Technical Assistance

The following items are not covered under the  ISTblast  warranty policy:

Parts or chassis replacement due to normal wears.

Defective material or workmanship is not considered normal wear

ISTBLAST  LIMITED WARRANTY

Содержание ISTblast DC 100

















Отзывы: