manualshive.com logo in svg

IST 18.BF200D, Руководство пользователя

Поделиться
Скачать
IST 18.BF200D Скачать руководство пользователя страница 22

18-22

18.

 

BF200D • BF225D • BF250D iST

®

4. Verify the following after completing the

steering link arm installation:
• Motor turns the proper direction when the

steering wheel is turned right and left. If the
steering is reversed, correct as necessary.

• Motor steering angle is equal when steering

wheel is turned full right and full left.
If the motor steering angles are not equal:
• Corrections can be made at the steering

box (refer to the steering box or steering
cable manufacturer’s instructions).

• Make the steering angles equal as

necessary.

The steering mechanism must not contact any 
part of the boat when the steering wheel is 
turned full right and full left and at all tilt 
angles. Correct as necessary and check 
again.

TIE BAR INSTALLATION (DUAL MOTORS)

Refer to the manufacturer's publications for 
information/instructions.
Dual or multi-motor installations must have a 
motor center-to-center distance of 711 mm (28 in) 
minimum. The right and left motors must be well 
balanced.
1. Install the steering system of choice.

2. Install a Honda or a commercially available tie

bar in the steering-arm hole (see page 

1-35

).

NOTICE

In dual applications, do not tilt one motor up when 
the boat is steered full right or full left, or the 
engine cover may be damaged.

Toe-in/Toe-out Adjustment

Refer to Dual Motor Adjustment on page 

2-9

.

TIE BAR

711 mm (28 in) MINIMUM

Содержание 18.BF200D

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды