Installation guide
Local Control Network - building controls in perfection
8
LCN-ULT
®
For safety reasons, this function can only be carried out directly on each single LCN-
ULT.
Transferring the command „ERASE ALL“ to other LCN-ULT´s in the LCN Bus, is not
possible!
Building installation with several LCN-ULT´s
(group formation, ”commission”)
When many LCN-ULT´s are being operated within one installation, the correct master
card from each associated transponder reader must always be used for programming.
To make this management more simpler, the following possibility has been created, to
combine many LCN-ULT´s into a “group” or “ commission”.
This is possible with an order of over 5 LCN-ULT´s!
When ordering you must state, how many transponder readers and how many master
cards that have to be combined. LCN-ULT´s will then be delivered, so that all the LCN-
ULT´s can be programmed using the same master card. Even the amount of master
cards is optional. Reordering for such a commission is possible at any time. No groups
or commissions can be later formated for LCN-ULT´s that have been already delivered.
LED blue/red
The colours of the Duo-LED´s can be toggled with a command and controlled in different
brightnesses (for max. brightness, stronger power supply required). To do this, use the
command “LED control / LCN-ULT” in the LCN-PRO version 3.5 or later.
