Active transponder with two push-buttons - LCN-AT2
The LCN-AT2 has the form of a keyring. W
reader, it wakens up from its current saving mode and transfers its identification number
(ID) to the reader (per HF-signal, 866MHz).
The HF-transmitter in the LCN-AT2 can also
be activated manually by pressing a push-
button. The range to the reader LCN-ATW
will then be around 50m.
Each of the push-buttons can trigger its
own function in the LCN-system.
Function of the LED´s on the LCN-AT2
LED
operation/push-button pressed
LED
battery change required
hen it comes in the range of an LCN-ATW
green
red
LCN-AT2
Installation guide
Local Control Network - building controls in perfection
®
key A
caption area
LED red
key B
LED green
1
