Bedienungsanleitung
Operating instruction
General notes
Don't operate several control elements at the same time.
Please read these operation instructions carefully before using the ISRI seat.
Make sure to follow all instructions and become familiar with the features of the seat.
The instructions must always be readily available for the driver.
In case of selling the vehicle or seat, the first owner is obligated to pass on this manual.
Liability and Warranty
Failure to follow this instruction manual may result in liability, warranty and national vehicle's type approval loss.
Manufacturer assumes no liability or warranty for consequent damages should this manual not be adhered to.
Failure to comply with the instructions provided may cause serious or fatal injury to yourself and others.
Attention to detail is imperative in order to adjust the seat to an optimal position for your body. Make sure that all the
seat functions work properly and that the seat is not defective. An incorrectly set seat or a wrong seating posture may
have a negative impact on the ergonomics, driver's body, and operating capacity of the vehicle. Improper settings of
the seat may affect the ability to properly operate the vehicle in a safe manner to prevent accidents that may cause
serious or fatal accidents.
The seat must be installed, maintained or repaired by qualified specialists. Maintenance shall be performed by
experienced professionals only. At time of installation, the regulations of the country of installation, the installation
instructions and operating manual terms, conditions and instructions of the vehicle manufacturer must be followed.
Basic Instructions
Taking proper and gentle care of your seat is imperative for a long lasting lifetime.
•
For your safety, and for the safety of others, the seat must only be adjusted while seated, when the
vehicle is fully stopped, and while the parking brake is pulled.
•
Before you start driving, the seat must be adjusted to an optimal position for your body and the correct seating
posture must be taken, particularly when switching vehicles.
•
Never use a damaged or faulty seat. After an accident the seat must be replaced.
•
In case of malfunction or defective parts an authorized dealership has to be visited immediately in order to check,
repair, or exchange the seat or its parts. A shaking seat can indicate, that screws got loose or it could be a hint for
another defect.
•
The following mechanisms must lock audibly into position; horizontal slides, backrest recline, seat cushion length,
swivel (optional) and tilt. Pull the levers completely during the whole duration of seat adjustment, otherwise improper
use could damage parts over time. The control levers must return to their normal position after adjustments are made.
•
•
Keep hands away from the adjustment mechanism and suspension system. Failure to follow this may cause
injury to your hand and fingers.
•
Making changes to the seat are strictly prohibited. Fullfilment of applicable regulations for vehicle's safety features
and type approval might expire. The safety of driver and others are endangered.
•
Do not place anything - like for example jackets, blankets, pillows or bags - on or over a seat, that has the heating
or ventilation feature. In this case it is also not allowed to use protective covers.
•
The seat shall not be used as method of ascent while entering the vehicle. Standing on the seat is not permitted.
Doing so can cause damage to the seat and/or personal injury.
•
•
not adjust the seat to a position where it can contact other components in the cab.
Make sure that the seat is able to oscilate freely in any direction. Otherwise damage could
occur to the seat or cabin.
•
Do not block any mechanisms with foreign objects, like for example bags and boxes.
•
In order to prevent objects from flying and causing bodily injuries in situations such as sudden
braking, do not place anything on the seat.
•
The seat is designed to hold a maximum driver's weight of 150 kg, resp. 330 lbs.
•
In the case of seat failure or defective parts, an authorized workshop must be visited immediately
so that the seat can be repaired or exchanged.
•
All seat functions have to be checked routinely, according to the appropriate maintenance intervals
of the vehicle.
At that time seat anchorages and fasteners, like screws, have to be checked for proper tightness.
Locking mechanisms of horizontal slides, backrest recliner, swivel, tilt and seat cushion adjustment
must be checked frequently for tightness as well, and to ensure that complete locking occurs
in all positions.
•
Inappropriate repairs or services can increase the risk of damaging the seat and the risk of injury.
Therefore, modifications to the seat are not allowed.
•
Only original spare parts can be used.
•
In case of a vehicle accident, the seat must be completely replaced.
•
Welding of broken steel parts is not permitted.
•
For running surfaces of the rollers no servicing is required. Rollers must not be oiled or greased.
•
Since dirt can cause seat malfunctions, the seat must be cleaned routinely to ensure a long lifetime.
•
Do
Information for visiting a workshop, repairs, maintenance and service
Care Guidelines
Upholstery shall be vacuum cleaned.
3/4
ISRI 6000/577SK
7018262/Rev.02.10.2014
