Operation
(1)
Installation
Step 1.
Choose a suitable location for the system. It must be placed on a flat surface.
Step 2.
Install the
Removable Drip Tray & Grill
at the
front
of the system.
Step 3.
Insert the
1/4" tube
into the
1/4" water inlet
at the
back
of the system.
Step 4.
Plug in the
main power supply
to the power socket at the
back
of the system.
Vibrations can be expected as the pump starts.
Step 5.
Prepare a bucket, remove
Drain Line Cap
at the
back
of the system, let it run for at
least
30 minutes
to
flush the system
. This should be done each time the filters are changed.
Step 6.
Once the rinsing is completed, screw back the
Drain Line Cap
.
Step 7.
The system is ready for use.