iSport 102640048, Руководство пользователя

Страница: 23 / 28

10.
INFLATION
WARNING!
Do not use a sharp tool! The use of a compressor would seriously damage your product.
This is a case of exclusion of warranty.
To familiarize yourself with your product during the first inflation, inflate it in a room at room
temperature (approx. 20°C). This will make the PVC flexible and facilitate assembly. If the
product has been stored at a temperature below 0°C, place it in a room at 20°C for about
12 hours before unfolding it.
Inflate it with the hand pump or any other pump designed to inflate boats, pool items,
beds, camping mattresses or other
low pressure inflatables.
Your product can be equipped with 2 types of valves:
①
Boston Valve (Two valves on the Side Tubes):
Unscrew the valve cap, screw the valve
insert onto its base and check that the valve
cap
stays accessible.
Insert the pump hose end piece and inflate it
until you will reach the required pressure.
After inflation tighten the valve cap (clockwise). A slight air-leak before screwing the
valve cap is normal. Only the valve cap can ensure final AIR TIGHTNESS.
②
Inflate the product in the following order (also indicated on the builder’s plate
printed on the product)
Do not exceed the maximum operating pressure.
Over pressure: Deflate until the recommended pressure level is reached.
Under pressure: re-inflate slightly