4
INTRODUCTION
Thank you for your purchase of the Vector FS8 Guitar cabinet/monitor.
With the
Vector FS8
™ the guitarist can hear exactly the same signal that is coming from
the Front of House sound system on stage. The Vector FS8 has two separate
inputs so the players can feed the speaker simulated output to one input and mix a
second monitor signal from FOH eliminating the need for a second stage monitor
speaker. The Vector FS8 can be used on the floor as a monitor in front or behind
the player. The Vector FS8 has a 40 degree tilt angle. The FS8 can also be
switched into a standard powered guitar cabinet mode allowing use with non-
speaker simulated rigs like a pedal board.
The Vector FS8 cabinet is based on a high performance 8 inch woofer designed
for excellent low-mid response. Also, a 1 inch silk dome tweeter high frequency
driver on a conical horn waveguide is incorporated for accurate HF response. The
silk dome tweeter is mounted above the woofer providing a coaxial response
pattern.
All of the components are powered by a dual channel, 175 watt RMS 350 watt
Peak ISP Technologies patented DAA
TM
(Dynamic Adaptive Amplifier) power
amplifier that has been precision tuned and equalized for flat, Full Spectrum Audio.
The Vector FS8 can deliver up to 122db SPL peak output level for even the most
demanding stage performance. While the Vector FS8 is the perfect partner of the
ISP Technologies Theta Pro DSP™ floor guitar system, it will also function
flawlessly with virtually any other line level guitar system.
The Vector FS8 is spectrally balanced, and will keep that balance even when on
stage even when you are driving it harder to compensate for the SPL level of
everyone else’s gear, crowd noise etc.
The Vector FS8 has a cabinet RESPONSE Switch on the back panel which allows
the cabinet to be used as either a full range flat response full spectrum guitar
monitor or as a standard powered guitar cabinet with typical guitar cabinet
response.
Содержание VECTOR FS8
Страница 1: ...1...
