background image

 

IMPORTANT SAFTEY INSTRUCTIONS 

Please read the following very carefully before operating this unit  

 

Read ALL instructions carefully before using this unit. Keep these instructions for future reference. Heed all warnings and follow all 
instructions. 

 

Do not use this unit near water, in the rain, or where there is moisture. If this warning is ignored a serious electrical shock or death may 
occur. 

 

Do not attempt to service this unit. No user serviceable parts inside. Refer servicing to qualified, ISP approved personnel. Servicing is 
required when the unit is damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen 
into the unit, the unit has been exposed to rain or moisture, does not operate normally, or has been dropped. 

 

Do not block any ventilation openings on the unit. Do not install near heat sources such as radiators, heat registers, stoves, or other 
apparatus that produces heat. 

 

Do not defeat the grounding pin on the power plug. A grounding type plug has two blades and a third grounding prong. If the grounded plug 
does not fit in your outlet, please consult an electrician for replacement of the outlet, which may be obsolete. 

 

Care should be taken to avoid any foreign objects or liquid into this unit. Avoid exposure of this equipment to dripping or splashing and 
ensure that no objects filled with liquid, such as vases, are placed on the equipment. 

 

Only use accessories or attachments that are specified by the manufacturer. 

 

Use only with the caster attachment, stand, connecting bracket, or table specified by the manufacturer, or sold as an accessory with the 
unit. When a castor attachment is used, use caution when moving the cart/apparatus combination to avoid injury from tipping over. 

 

To completely disconnect this unit from the AC mains, disconnect the power supply cord plug from the AC receptacle. 

 

This active speaker system has internal power amplifier(s) and a heatsink located internally with cooling ports on the back of the unit for 
airflow over the heatsink. Care should be taken to avoid placing this active speaker in a location where the airflow over the heatsink is 
impeded and proper cooling of the internal amplifiers is not provided. Avoid placing this system close to other heat sources. The external 
heatsink may reach high temperatures under normal use. Do not block the external heatsink with any other object. Make certain there is 
proper ventilation for the external heatsink when in use. 

 

Do not drive the unit into excessive heavy distortionfor an extended period of time to avoid premature speaker failure. 

 

Failure to follow these instructions may void the warranty. 
 

 

 

THIS UNIT CONTAINS POTENTALLY LETHAL VOLTAGES. TO PREVENT ELECTRIC SHOCK OR 

HAZED, DO NOT REMOVE THE POWER AMPLIFIER MODULE, INPUT PANEL OR AC INPUT PANEL. 

NO UER SERVICABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED ISP TECHNOLOGIES 

SERVICE PERSONNELL. 

 

 

Содержание VECTOR FS8









Отзывы: