background image

 

 

WARRANTY AND SERVICE 

 

 

  The Internal Circuitry is fully guaranteed to be free of defects under normal use and service 
for a period of two years from the date of purchase. The Speakers and Cabinet that are used 
in  this  product  are fully  guaranteed  to  be free  of  defects  under  normal  use  and  service  for  a 
period of three years.   
 

 
  Any  damage  resulting  from  the  misuse  or  the  failure  to  follow  the  precautions  and 
instructions will void the warranty. 
 
  In the event that the unit needs to be repaired. Please return the unit to ISP Technologies 
directly.  Simply  repack  the  unit,  send  a  copy  of  the  original  receipt,  a  note  stating  the 
problem, and send it to: 
 
                         ISP Technologies, LLC 
                         5479 Perry Drive Suite B 
                         Waterford, MI 48329 
                          Attn: Repair Dept. 
 
  All shipping charges must be fully prepaid. 
 
ISP will not be responsible for any damages incurred in  shipping of  any unit. Any claim will 
need to be settled with the shipping company.  
 
The warranty will be voided if the serial number has been tampered with in any way. 
The warranty card must also be filled out and returned in order to activate the warranty. 
 
Should  you  have  any  questions  for  the  repair  department  prior  to  returning  the  product 
please call 1-(248)-673-7790 
 
NOTE:  If  it  is  determined  that  the  power  amp  module  has  failed,  it  is  possible  for  an  ISP 
certified  service  center  to  remove  the  module  from  the  cabinet  by  removing  the  mounting 
screws  and  disconnecting  the  speaker  terminals  and  the  transformer.  The  module  may  be 
sent  back to ISP separately.    Please contact  ISP for technical support to help determine if 
the amplifier module may be defective.  
 
     
 
 
 
 
 
ISP TECHNOLOGIES, LLC 
5479 Perry Drive Suite B 
Waterford, MI. 48329 
248-673-7790 
FAX: 248-673-7696 
www.isptechnologies.com  

Содержание HDL 2208











Отзывы: