background image

 

Principles of the Audio Transient Suppressor operation: 

 

 
 
 

 
 
 

 
 
 

 
 
 
 

 
 
 

 
 
The ISP Technologies Audio Transient Suppressor is designed to connect between the 

audio output of the main outputs of the front of house mixer and the input to the power 
amplifiers  or  powered  active  speakers.    The  Audio  Transient  Suppressor  needs  to  be 
connected to the switched power circuit of the mixer, which allows the Audio Transient 
Suppressor  to  turn  on  and  off  at  the  same  time  the  mixer  is  powered  up  and  down.  

Most fixed installations have a single AC circuit that will power up the mixer and  any 
external  signal  processing  units  with  a  single  switch.    You  simply  connect  the  Audio 
Transient  Suppressor  to  the  same  circuit  or  use  a  power  strip  as  your  master  on  off 

circuit.  The Audio Transient Suppressor has four independent and fully isolated audio 
channel paths to connect between the mixer output and power amplifier input.  When 
the  power  is  applied,  the  Audio  Transient  Suppressor  will  protect  or  mute  the  audio 
output between the mixer and input of the amplifiers for a period of approximately 4 

seconds.  On power down the system will sense the removal of AC power in the first ½ 
cycle and will protect or mute the audio path between the mixer and amplifiers before 
any transient can appear.  The means that even if there is a power outage the system 

will  protect  your  amplifiers  and  speakers  before  any  damaging  transient  is  present  at 
the mixer output.  The following pages illustrate the waveforms of a typical system and 
the output of the system with the Audio Transient Suppressor connected.    

 
 
 
 

 

NOTE: The ISP Technologies Audio Transient Suppressor will eliminate the turn on and turn off transients 
that occur when switching on a mixer or other external signal processing equipment but will not have any 

affect  on  power  line  surges,  lightening  strikes  or  other  potential  damage  from  transients  in  the  audio 
signal  during  use.    ISP  Technologies  recommends  the  use  of  other  power  line  condition  or  surge 

suppression devices in conjunction with the Audio Transient Suppressor. 

Содержание Active series







Отзывы: