background image

 

11 

WARRANTY AND SERVICE 

 

 
The Internal Circuitry is fully guaranteed to be free of defects under normal use and service 
for  a  period  of three  years from  the  date  of  purchase.    The  Speakers  and  Cabinet  that  are 
used in this product are fully guaranteed to be free of defects under normal use and service 
for a period of three years.   
 
 
Any damage resulting from the misuse or the failure to follow the precautions and instructions 
will void the warranty. 
 
In the event  that the unit needs to be repaired.   Please return the unit to ISP Technologies 
directly.    Simply  repack  the  unit,  send  a  copy  of  the  original  receipt,  a  note  stating  the 
problem, and send it to: 
 
                         ISP Technologies, LLC 
                         5479 Perry Drive Suite B 
                         Waterford, MI 48329 
                         Attn: Repair Dept. 
 
All shipping charges must be fully prepaid. 
 
ISP will not be responsible for any damages incurred in shipping of any unit.  Any claim will 
need to be settled with the shipping company.  
 
The warranty will be voided if the serial number has been tampered with in any way. 
 
Should  you  have  any  questions  for  the  repair  department  prior  to  returning  the  product 
please call 1-(248)-673-7790 
NOTE: This Product may be covered under one or more of the following patents or patents 
pending: 7,035,413; 6,944,305; 6,931,134; 6,831,514; 6,091,013 
 
NOTE:  If  it  is  determined  that  the  power  amp  module  has  failed,  it  is  possible  for  an  ISP 
certified  service  center  to  remove  the  module  from  the  cabinet  by  removing  the  mounting 
screws  and  disconnecting  the  speaker  terminals  and the  transformer.    The  module may  be 
sent back to ISP separately.  Please contact ISP for technical support to help determine if the 
amplifier module may be defective.  
 
     
 
 
 

 

ISP TECHNOLOGIES, LLC 
5479 PERRY DRIVE SUITE B 
WATERFORD, MI 48329 
248-673-7790 
FAX: 248-6737696 

www.istptechnologies.com

  

 

Содержание SA115












Отзывы: