3. Insert a new battery. When doing so, mind the correct polarity as shown on the bottom
inside the battery fitting.
4. Reattach the casing cover to the casing body.
5. Run a battery test by pressing the control switch through the hole of the housing with a
pin or open paperclip. When the power is supplied from the battery, the red function
check integrated in the device blinks for about 3 seconds and the device is
automatically ready for use.
General information
1.
Electric appliances, packaging material etc. should be kept away from children.
2.
Dispose packaging and worn out material correctly and in an environmentally
friendly way.
3.
Do only pass on the device including the operation manual.
4.
Subject to change of design and technical data without notice for the sake of
constant product improvement.
Safety instructions
Important:
Damage caused by not adhering to the operating instructions is not covered
by guarantee. ISOTRONIC accepts no liability whatsoever for any resulting consequent
damages.
- Only operate the device at its intended voltage.
- In case of repairs, only use original spare parts, to avoid serious damage.
- Repairs or other works, e.g. changing a fuse, etc. may only be carried out by an
appropriately trained, skilled person.
- It must be noted that operator or connecting errors lie outside the influence of
ISOTRONIC and we cannot accept any liability for resulting damages.
- Always check whether the device is suitable for the respective place where you intend
using it.
-This appliance is not intended for use by persons (including children aged from 8 years)
with reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning use of
the appliance by a person responsible for their safety.
-Children should be supervised to ensure that they do not play with the appliance.
