MEASUREMENT AND ASSEMBLY MANUAL
Manual validity: 01.02.2015
8
TESTING
To ensure proper function of the roller blind, check if the winding drum is perfectly level after installation.
Following the roller blind installation, check if the end user understands the method of operation of the roller blind, and give
this manual to the user for future reference.
9. OPERATION
NOTE: Prior to setting the roller blind in motion, check if no persons or objects obstruct its movement. Before
operating the roller blind, move your hands outside of the movement range to prevent compression. Forced
operation can cause damage to the roller blind.
SAFETY DEVICES
The motor includes a disconnecting overheating protection. Thermal disconnection is activated after approx. 4
–6 minutes
of continuous operation. Before reactivating, let the roller blind motor cool down. Should you need assistance, contact your
dealer and ask for original spare parts.
DISASSEMBLY / DISPOSAL
As regards Directive 2002/95/EC (RoHS) on the use of lead, chrome, cadmium and other substances hazardous to
environment, the roller blind does not include any significant quantities of such substances. No special instructions have
been stipulated for the disassembly or disposal of the roller blind. However, ISOTRA seeks to eliminate, if practicable, the
use of such materials so that all parts of the roller blind conform to the requirements of said Directive.
In accordance with Directive 2002/96/EC on waste electrical and electronic equipment (WEEE), the motor and any
installed electrical control units should be removed from the roller blind before disposal. Do not dispose of the roller blind
as current municipal waste. All parts of the roller blind must be handed over to a local collecting centre for disposal. In case
of replacement of the roller blind, it is possible to send the used roller blind to ISOTRA for disposal after a new roller blind
has been ordered.