Isotra VERANDA HRV80-ZIP, Руководство по измерению и сборке

Страница: 9 / 30

MEASUREMENT AND ASSEMBLY MANUAL
Document validity: 23.5.2019
.05.2019
9
DESIGN
The fabric has zippers on the sides, and if the guide rails are properly installed, these zippers ensure the fabric remains
taut in any position of the bottom section thanks to the strain between the zipper and the guide rails.
Cracking may be heard when retracting the screen, which is caused by the fabric tension and by pushing the air from
under the fabric when winding up. Creases may also form on the zipper side, caused by different material thicknesses
and expansion factors.
In blackout blinds, the zippers are placed on the Soltis side of the fabric, not on the side with the blackout film, in order
to attain better adhesion and reduced fabric movement. It is therefore possible that due to wind or if seen at an angle, a
small part of the zipper can be seen, but this is insignificant when compared with the overall view or the fabric tension
(reduced creasing).
When the 86/92 fabric is used, the zippers are always on the rear side of the fabric – i.e. on the window side. In addition
to placing an inscription or a logo to the fabric, it is also possible to inverse the fabric colour or the fabric side on the sun
screen.
BLACKOUT
The Veranda can also be used to blacking out the room, i.e. to protect it from light coming from the outside during
presentations or projections, but it is not a 100% blackout during which it would be possible to develop photographs.
The following must be taken into account to achieve proper blackout:
• It is only possible by using a blackout fabric.
• The spaces between the guide rails, the box, the wall and the window frame must be carefully sealed (for example, by
using silicone, strips, etc.).
• Wind action can cause the bottom lath to waft up, and a gap may occur as a result.
• Account should be taken of a small gap between the extension pole and the guide rail.
• Placing an extra angled profile (30×20×2) for the bottom section against the wall reduces the chance of light
penetration even more.
FIXTURES AND FITTINGS
All fixtures and fitting are made from stainless steel, and all accessories are always part of the supply.
PACKING
The Veranda HRV80-ZIP is supplied packed in robust cardboard boxes.
USE AND MAINTENANCE
Proper use and maintenance greatly increase the lifetime of the sunblind.

Do not use the screen as protection against rain or wind.

Regular maintenance prevents excessive wear and operational problems.

Cleaning the frame: use soft water instead of aggressive substances, that may affect the coating and protective
layers.

Cleaning the fabric: when dry, with a semi-stiff brush.

Clean stubborn stains using warm water and light detergent solution, rinse with copious amounts of clean
water.

Always let the fabric dry fully before rolling it up (even after an unexpected rain shower).