MEASUREMENT AND ASSEMBLY MANUAL
Validity of the manual: 1. 8. 2016
4
Basic product specification (exterior view)
Assembly parts of blind TITAN 90:
10, 20
Self-supporting guiding channels
1 pc
30
Short shaft
2 pc
40
Upper head rail including engine
1 pc
50
Slats
x pc (according to the slats number)
60
Stainless steel securing clips of slats
x pc (according to the slats number)
70
Assembly spacing pad
x pc (according to the blind height)
120
Shaft coupling
2 pc
130
Head rail bracket
x pc (according to the blind width)
400 - 450
Extension of front cover holder
x pc (according to the blind width)
460
Screw M5x8
x pc (according to the blind width)
470
Pad M5
x pc (according to the blind width)
2.1. PREPARATION FOR ASSEMBLY
- Check installation dimensions: Blind dimensions should be as shown in the order form. Installation tolerance must
correspond to the technical description of the product.
- Check assembly hole and its preparedness.
- Check all materials, the choice of appropriate anchoring elements and the proper tools, preparation of electrical
connectors for connection to the blind engine.
