MEASUREMENT AND ASSEMBLY MANUAL
Validity of the manual: 1. 9. 2014
2
Depth of the glazing bar:
19 and more mm
– no base
15 - 19 mm one base
on each side
11 - 15 mm two bases
on each side
Maximum guaranteed area: 2.5 m
2
For dimensions outside the stated limits, it is recommended to consult with the manufacturer.
The ideal measurements of the blind are in the diagram. Such measurements can be taken by using the cut of the upper
profile; by the aid of the side board place on the glazing bar, it is possible to record the point, the maximum possible width
of the blind. From this point the dimension of the same point on the opposite side is measured. This marking is always
influenced by the form and size of the glazing bar of the window profile.
2. ASSEMBLY
Assemble exclusively according to this manual to prevent redundant assembly errors and other related problems.
AIDS FOR ASSEMBLY:
•
electric drill, drills
•
cross-head screwdriver
•
knife, scissors, pliers
for fixing blinds
for fixing the holder of the
chain
hole for tightening pin
screw
3,9 x 16; 3,9 x 22
3,9 x 16
3,2 mm für Plastikfenster
und Alu-
Fenster, 3 mm für
Holzfenster
drill with the diameter Ø
2,5 mm
2,5 mm
