Isotra Cetta 35, Техническое руководство

Страница: 63 / 100

62 63
INTERIOR BLINDS
Assemble exclusively according to this manual to prevent redundant assembly errors and other related problems.
Tools for assembly
- Tape measure
- Water gauge
- Pencil
- Hammer
- Cordless electric drill and drills according to base material- Accumulator drill
- Magnetic adapter, Bits PZ2, PH2
Inspection:
- before assembly we recommend to inspect all parts during the delivery of goods; this will prevent the origination of any pro-
blems. Any defects or comments concerning the assembly or blinds must be notified to the manufacturer..
assembly:
- Measure the hole and compare with the already prepared blind, check the control mechanism.
- Locate the holders on the blind so as not to intervene into the bearings of the blind and control segments.
- Fix the holders horizontally.
- Insert the blind into the sleeves in the holders and fix.
- Lower the blind into the lower position
- Attach the wire holders if the blind has slats guided by the rope
- At the same time, inspect if the wires do not clamp the slats.
Interior blinds Cetta 35, 50 - Economy
Assembly