Isotherm 3160BB1C, Инструкция по эксплуатации

Страница: 14 / 24

Manuale d’uso – User’s Manual
CG 23072012 Ver 1.2 Pag.
14
Water connection
This appliance should be supplied only
with cold water for human consumption
(drinking water).
The water intake hose on the back of the unit is
located at the bottom left. At the time of packing
the pipe is fixed with adhesive tape to the wall of
the unit.
The device can be connected directly to the on-
board water connection. Pressure must be
included between 1bar and 10bar.
Ventilation
It’s extremely important that the compressor unit
is properly ventilated and that the influx of fresh
air is always guaranteed.
The natural ventilation from the bottom up can be
increased with ventilation openings at the rear of
the inlet and side openings. (See pictures below)
Right side
Left side