__________________________________________________________________________________
5 |
P a g e - S e i t e
ATTENTION! HOT!
These products contain electrical heating
elements. Never touch in case of hot surface of
the product or when the product is in operation.
This affects also all metallic parts, which can
reach high temperature during operation. There
is danger of combustion.
INFLAMMATION AND EXPLOSION RISK!
The product is not explosion-proof. It should
never be integrated into tempering processes
where liquids handled may support explosions.
This covers also applications where gas/air-
mixtures may occur. The product must not be
used to heat explosive media or those
developing explosive gases when heated. The
product must be installed only outside of
hazardous locations.
General Product Information
The products consist of Polymer insulated
heating cables for industrial use. Depending on
the requirement they are designed with the
following features:
-
Various alloys of resistance heating wires
-
Layers of Polymer Insulation
-
Additional Layers of metallic braid
-
Additional temperature sensors and/or
thermal protectors
-
Additional controllers
-
various operating voltages and performance
ratings
They are used to heat-up, maintain and
compensate heat losses internally and externally
on refrigeration draining line systems and
freezer doors. The maximum admissible product
temperature varies in design and in the different
insulation material. The maximum achievable
withstand temperature, however, depends on
the specific operating conditions. It may be
influenced by the heat conductivity of the
materials and media to be heated as well as by
the throughput, the ambient temperature, the
insulating material and the insulation thickness.
ISOPAD offers a standard range of different
versions but also versions tailored
(manufactured to desired length) individually to
the application.
Note:
For individual specifications please refer to the
product label or type plate. In the case of
installation difficulties or special requirements it
is recommended to discuss and agree suitable
installation procedures. In case of doubt or if
necessary please contact us. (see last page for
contact information)
Additional Safety Instruction
(product related)
Attention!
When using electric surface heating
equipment, basic safety precautions should be
followed in order to prevent the occurrence of
burns, electric shock, fire or injury to persons
or animals.
The following safety notes have to be followed:
-
The products must not be used on plastic
or other non-metallic surfaces.
-
The products are not suitable for use in
applications where they may be subject to
aggressive chemicals.
-
Prior to connecting the heating to mains,
please ensure that the mains voltage
matches that indicated on the label.
-
Check the suitability of the product for the
maximum withstand temperature both
energized and de-energized (refer to the
Technical Data in this manual and on the
label).
-
Care must be taken not to damage the
product during installation.
-
The product is electrical equipment. It
must therefore be operated only by
properly trained staff.
