IPBridge Installation Guide
Page 11
2.3
: IP-BRIDGE RESET BUTTON
The PowerNet IP-Bridge has a recessed reset-button located in the position shown on
Figure 02. It can be used for two different types of resets.
It is helpful to monitoring the amber LAN status LED allows you to determine the
status of the reset operation.
Reset CPU: Press, hold (approx. 2 seconds) and release the Reset button.
Once the Reset Button is released, all the door status LED’s will turn amber, and
in 15 seconds return to the normal display. If the door’s LEDs do not turn
amber, then the reset did not occur.
Reset Configuration: Press and hold the Reset button (approx. 10 seconds),
until all door status LED’s turn Amber. After the LED’s turn Amber, release the
Reset button. Selected IP-Bridge configurations are reset to factory defaults.
Setting that are changed include:
IP Address
(Default value:
192.168.1.119)
IP Port
(Default value:
10001)
Subnet Mask
(Default value:
255.255.0.0)
Gateway
(Default value:
0.0.0.0)
DHCP Setting
(Default value:
Off)
ACS Server
(Default value:
SrvrAcs)
ACS Server IP
(Default value:
0.0.0.0)
Clear AES Encryption Configuration
Reset the IP-Bridge’s Password.
Figure 02
