ISON IS-RG528 Series Скачать руководство пользователя страница 90

Страница: 90 / 122

Pkts 512 to 1023 Octets

Total number of packets (including bad packets) received that were between 512 and

1023 octets in length.

Pkts 1024 to 1518 Octets

Total number of packets (including bad packets) received that were between 1024 and

1518 octets in length.

Octets

The total number of octets of data (including those in bad packets) received on the

network (excluding framing bits but including FCS octets).

Packets

The total number of packets (including bad packets, broadcast packets, and multicast

packets)received

Broadcast Pkts

The total number of good packets received that were directed to the broadcast address.

Note that this does not include multicast packets

Multicast Pkts

The total number of good packets received that were directed to a multicast address.

Note that this number does not include packets directed to the broadcast address.

CRC Align Errors

The total number of packets received that had a length (excluding framing bits, but

including FCS octets) of between 64 and 1518 octets, inclusive, but had either a bad

Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad

FCS with a non-integral number of octets (Alignment Error).

Undersize Pkts

The total number of packets received that were less than 64 octets long (excluding

framing bits, but including FCS octets) and were otherwise well formed.

Oversize Pkts

The total number of packets received that were longer than 1518 octets (excluding

framing bits, but including FCS octets) and were otherwise well formed.

Fragments

The total number of packets received that were less than 64 octets in length (excluding

framing bits but including FCS octets) and had either a bad Frame Check Sequence

(FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral

number of octets (Alignment Error).

Jabbers

The total number of packets received that were longer than 1518 octets (excluding

framing bits, but including FCS octets), and had either a bad Frame Check Sequence

(FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral

number of octets (Alignment Error).

Collisions

The best estimate of the total number of collisions on this Ethernet segment.

Drop Events

The total number of events in which packets were dropped by the probe due to lack of

resources. Note that this number is not necessarily the number of packets dropped; it is

just the number of times this condition has been detected.

Содержание IS-RG528 Series



























































































































Результаты поиска

Содержание IS-RG528 Series

Отзывы:

Похожие инструкции для IS-RG528 Series

Бренды по названию

Популярные бренды

ISON IS-RG528 Series, Руководство по настройке веб-инструмента

Результаты поиска

Содержание IS-RG528 Series

Отзывы:

Похожие инструкции для IS-RG528 Series

Бренды по названию

Популярные бренды