ISON IS-RG528 Series, Руководство по настройке веб-инструмента

Страница: 79 / 122

79
configuration options will be locked.
To configure Group 3, both Group1 and 2 should be disabled first. When Group 3 is enabled,
all configuration of Group1 and 2 will be reset to default. Group 1 and 2 all configuration
options will be locked.
Role
Configure the Ring group on this switch as specific role.
Group 1 - support option of ring-master and ring-slave.
# Ring - it could be master or slave.
Group 2 - support configuration of the ring, coupling and dual-homing.
# Ring - it could be master or slave.
# Coupling - it could be primary and backup.
# Dual-Homing
Group 3 - support configuration of the chain and balancing-chain.
# Chain - it could be head, tail or member.
# Balancing Chain - it could be central-block, terminal-1/2 or member.
Note 1 - Group 1 must be enabled before enable Group 2 to coupling.
Note 2 - When Group 1 or 2 is enabled, the configuration of Group 3 will be disabled.
Note 3 - When Group 3 is enabled, the configuration of Group 1 and 2 will be
disabled.
Ring
Port(s)
Selecting ring port(s).
Each ring port must be unique, CANNOT be configured in different groups; 2 ring ports
between ring/chain CANNOT be the same.
# When role is ring/master, one ring port is forward port and another is block port . The
block port is redundant port; it is blocking port in normal state.
# When role is ring/slave, both ring ports are forward port .
# When role is coupling/primary, only need one ring port named primary port .
# When role is coupling/backup, only need one ring port named backup port . This backup
port is redundant port; it is blocking port in normal state.
# When role is dual-homing, one ring port is primary port and another is backup port . This
backup port is redundant port; it is blocking port in normal state.