ISON IS-DS5150, Руководство пользователя

Страница: 49 / 66

n
- 49 -
5.4 TCP Client Mode Applications
In TCP Client Mode, the IS-MS3180 can actively establish a TCP connection to a specific Modbus TCP
slave device. An example of how the complete system should operate is shown below:
The following are examples of pair-connection tests:

TCP Client Mode Settings:
Model
Port Settings
(default)
Pair-connection Settings
Baud
Rate
Data
Format
Server
Mode
Remote
Server IP
Remote TCP Port
IS-MS3180 115200 8, N, 1 Client
10.0.8.10
502
IP address and TCP port for the Ethernet I/O module
(Modbus TCP/UDP slave)
Ethernet I/O
module
- - - - -
Step 1: Connecting to a network, a PC and a Power Supply
1. Confirm that the IS-MS3180 device is functioning correctly. For detailed information regarding
how to install, configure and operate your IS-MS3180 series module, refer to Chapter 3 “Getting
Started” .
2. Connect both the IS-MS3180, the Slave Device (e.g. an Ethernet I/O module, optional) and your
computer to the same sub network or the same Ethernet Switch. For detailed information
regarding RS-232/RS-422/485 wiring, refer to Section 2.5 “Wiring Notes for RS-232/422/485 Interfaces” .
Step 2: Configuring the Ethernet Settings
Contact your Network Administrator to obtain a correct and functioning network configuration
(including the IP Address, Mask and Gateway details) for the IS-MS3180 module. Also refer to
Chapter 3 “Getting Started” for more details.