ISON IS-DH310P-2F-8, Быстрое руководство по установке

Страница: 6 / 12

6
Installation package (the mounting kit)
This product can be installed by din-rail mounted or wall-mounted. Din-rail brackets and wall-mounted
bracket are included.
Power Input connection
This product provides 6 pin terminal block. The POE port can be operated from 48-56VDC power source.
The VDC power range can be 48VDC only or lower, or wide range from 48-56VDC. Please always to make
sure your input voltage is the supported voltage range for each model.
WARNING – Any exceeded input voltage will not make this product function properly and may
damage it.
To make power connection –
This unit can receive 3 power inputs. PW1, PW2, and PW3, Follow the printed polarity for V1+, V1-, V2+,
V2-, and ground. Connect positive wire to V+, connect negative wire to V-, and also connect neutral wire to
the ground screw as shown.
Relay – This relay function monitor Power failure. You may use 24V@1A relay connection to your external
alarm device to monitor power status. Relay function will only work with PW1 and PW2. When PW1 and
PW2 are connected, the relay is in “OPEN” mode. The LED RLY indicator will goes OFF. When only PW1 or
PW2 is connected, the relay is in “SHORT” mode. The LED RLY indicator will goes “ON”
6 pin Terminal Block x1 Din Rail Bracket x 1
Wall mount bracket x 2