ISON IS-DH310P-2F-8, Быстрое руководство по установке

Страница: 11 / 12

11
Reserve polarity protection
Present
Overload current protection
Present
Power Supply
PW1 and PW2 for Redundant Dual DC46~57V
PW3 for Power DIN to connect external power adapter DC
46-57V
For Switch only --- Power input range DC 12-56VDC
For POE --- Power input range 46-57VDC
Power Consumption
5.76W@48 VDC full load, Without POE
Alarm Relay Contact
Relay outputs with current carrying capacity of 1 A
@24VDC, for PW1 and PW2
Relay in open circuit mode when 2 powers are connected.
In short circuit mode when only one power supply is
connected
POE power
Input Voltage 48VDC-56VDC.
POE power per port 30watts. Maximum 36Watts with
56VDC input.
Maximum total power 200Watts with 56VDC input
Removable Terminal Block
Provide 2 Redundant powers , Alarm relay contact ,6 Pin
for PW1 and PW2 ( PW3 is an independent Power din
connection for external power adapter)
Wire range: 0.34mm^2 to 2.5mm^2
Solid wire (AWG):12-24/14-22
Stranded wire(AWG): 12-24/14-22
Torque:5lb-In/0.5Nm/0.56Nm
Wire Strip length: 7-8mm
Operating Temperature -40
℃
~75
℃
fully tested.
Operating Humidity
5% to 95% (Non-condensing)
Storage Temperature -40
℃
~85
℃
MTBF (mean time between failure)
490,304 hrs ( MIL-HDBK-217F) at 25°C
Housing Rugged Metal ,IP30 Protection
Case Dimension (L x W x D)
142mmx47.3mmx135.3mm (LxWxD)
Installation mounting
DIN Rail mounting and Wall Mounting