ISON IS-DG500 Series, Руководство пользователя

Страница: 19 / 63

11
3.2 Enable Mode Commands
All the “show - -” commands in this section can also be executed under any other command
mode except Initialize Mode.
3.2.1 configure terminal
Description Enter configuration mode.
Syntax configure
Parameter None
3.2.2 disable
Description
Enter init mode.
Syntax disable
Parameter
None
3.2.3 show ntp status
Description Show SNTP information.
Syntax show sntp
Parameter None
3.2.4 show users
Description Show account list.
Syntax show account
Parameter None
3.2.5 show running-cfg
Description
Show running configuration.
Syntax show running-cfg
Parameter None
3.2.6 show running-config interface
Description Show default running configuration.
Syntax show running-config interface vlan <vlan_list> [ all-defaults]
Parameter None
3.2.7 show version
Description Show firmware hardware and software status update status.
Syntax
show version
Parameter None
3.2.8 show clock
Description Show current time.
Syntax Show clock
Parameter None
3.2.9 show version
Description Show version information.
Syntax show version
Parameter
None
3.2.10 show system inventory
Description Show system inventory.