5
Figure 2-1 Screen Description
2.4 Execution Modes
The CLI contains several execution modes. Users will see different set of commands under
different execution modes. Table 2-1 lists all the execution modes and their purposes. When
users enter a certain execution mode, the corresponding mode prompt will be displayed
automatically on the screen. The mode prompts of all the execution modes are also listed in
Table 2-1.
Table 2-1 List of Execution Modes
Mode
Access Level
Prompt
Init Mode
Guest
>
Enable Mode
Guest
#
Config Mode
Guest
(conf)#
Alarm Profile Config Mode
Engineer
(alarm-profile-conf)#
Gigabit Interface Config Mode
Engineer
(gigabit-intf-conf)#
ACL Profile Config Mode
Engineer
(acl-profile-conf)#
scheduler Profile Config Mode
Engineer
(sch-profile-conf)#
Vlan Interface Config Mode
Engineer
(vlan-intf-conf)#
IGMP MVR Profile Config Mode
Engineer
(igmp-mvr-profile-conf)#
IGMP ACL Profile Config Mode
Engineer
(igmp-acl-profile-conf)#
I.A. Ring Group Config Mode
Engineer
(ring)#
Trunk Group Config Mode
Engineer
(trunk-group-conf)#
2.5 Getting help
The user can get help by entering a question mark ‘?’ at each position in the command. The
displayed result depends on the execution mode and previous input.
192.168.0.1
Содержание IS-DG500 Series
Страница 2: ......