1
Lite/Unmanaged Industrial
Gigabit Ethernet Switch
Quick Installation Guide
Overview
The lite/unmanaged Industrial Gigabit Ethernet
Switch solutions are designed for supporting
standard industrial applications without complex
setup to make the network truly plug-and-play.
Package Checklist
Please verify that the box contains the following
items:
Item
Quantity
Unmanaged switch
1
Wall-mount plates
2
DIN-Rail CLIP
1
M4 Screws
(for the wall mount plates & DIN CLIP)
4
DC power terminal block
1
Quick Installation Guide
1
Safety Instructions
When a connector is removed during installation,
testing, or servicing, or when an energized fiber is
broken, a risk of ocular exposure to optical energy
that may be potentially hazardous occurs, depending
on the laser output power.
The primary hazards of exposure to laser radiation
from an optical-fiber communication system are:
Damage to the eye by accidental exposure to a
beam emitted by a laser source.
Damage to the eye from viewing a connector
attached to a broken fiber or an energized fiber.
Documentation Conventions
The following conventions are used in this quick
installation guide to emphasize information that will
be of interest to the reader.
Danger
—
The described activity or situation
might or will cause
personal injury
.
Warning
—
The described activity or situation
might or will cause
equipment damage
.
Caution
—
The described activity or situation
might or will cause
service interruption
.
Note
—
The information supplements the text
or highlights important points.
Technical Specifications
Model
5-Port
5-Port with
PoE
8-Port
Ethernet
Copper RJ45
Ports
10/100/1000 Mbps speed auto-negotiation;
MDI/MDIX Auto-crossover
SFP (pluggable)
Ports
100/1000BaseSFP slot
Fiber port
connector
LC typically for
fiber (depends
on module)
LC typically for
fiber
LC typically for
fiber (depends
on module)
PoE
NA
IEEE 802.3at
PoE PSE
NA
Power
Power input
Redundant Input Terminals; Reverse power
protection
Input voltage
range
12-58 VDC
12-58 VDC,
54-58V for
PoE+, 48-58V
for PoE
12-58 VDC
Environmental and Compliances
Operating
temperature
-40 to +75°C
(cold startup at
-40°C)
-40 to +75°C
(cold startup at
-40°C)
-40 to +75°C
(cold startup at
-40°C)
Storage
temperature
-40 to +85°C
Humidity
5 to 95% RH (non-condensing)
Mechanical
Ingress
protection
IP30
Dimension
(without DIN rail
clip)
112.2mm(H) x
29.1mm (W) x
89.4mm (D)
139mm(H) x
29.1mm (W) x
107mm (D)
117.8mm(H) x
39mm (W) x
96.9mm (D)
Weight
329g
469g
439g
Installation
option
DIN-Rail mounting
Wall mounting
