4
Dip switch function
Amber
ON – 100M speed is detected.
OFF – 10M speed is detected
P1--Power
ON -- Power is detected
LK/Act-- Fiber port
Link/Active
ON --fiber is detected.
Flashing -- data is transmitting / receiving
Green –
ON—TX link is detected
Flashing – TX data is
transmitting / receiving
DIP 1
ON
Converter mode
OFF
Switch mode (default)
DIP 2
ON
LFP function enabled
OFF
LFP function disabled (default)
ON
OFF
2 1
LED indicator
This unit is equipped with dip switches, located on the front panel marked as SW1. Adjusting the dip
switches will change the default function of this unit. This unit has set to manufacturer default as:
switch mode and LFP function off.
The table shown as you may change the dip switch setting to your desired environment.
SW1