iSolution SW-90 RGBW, Руководство пользователя

Страница: 3 / 20

SW-90 RGBW
2-
1. Safety Instruction
WARNING
Please keep this User Guide for future consultation. If you sell the unit to another user, be
sure that they also receive this instruction booklet.
Important:
Damages caused by the disregard of this user manual are not subject to warranty.
The dealer will not accept liability for any resulting defects or problems .
y
Unpack and check carefully that there is no transportation damage before using the
unit.
y
The unit is for indoor use only. Use only in a dry location.
y
Do install and operate by operator.
y
Use safety chain when fixes the unit. Don’t handle the unit by taking its head only, but
always by taking its base.
y
The unit must be installed in a location with adequate ventilation, at least 50cm from
adjacent surfaces.
y
Be sure that no ventilation slots are blocked, otherwise the unit will be overheated.
y
Before operating, ensure that the voltage and frequency of power supply match the
power requirements of the unit.
y
It’s important to ground the yellow/green conductor to earth in order to avoid electric
shock.
y
Maximum ambient temperature TA : 40 . Don’t operate it wher
℃
e the temperature is
higher than this.
y
Don’t connect the device to any dimmer pack.
y
During initial start-up some smoke or smell may arise. This is a normal process and
does not necessarily mean that the device is defective, it should decrease gradually.
y
Make sure there are no flammable materials close to the unit while operating, as it is
fire hazard.
y
Look over power wires carefully, replace immediately if there is any damage.
y
Unit surface temperature may reach up to 60 . Don’t touch the housing bare
℃
-hand
during its operation.
y
Never run on for a long time lest shortening lifespan.
Please read carefully the instruction, which includes important
information about the installation, usage and maintenance.