Chapter 9 ACP142 View
This chapter describes how ACP142 features of M-Switch are monitored and operated.
This is performed using the M-Console ACP142 View.
The ACP142 Message Transfer View is used to monitor incoming and outgoing ACP142
messages.
Figure 9.1. ACP142 Circuit MTA and Channel Selection
The ACP142 View left hand side allows MTAs and channels to be selected and displayed.
Each channel is presented as a selectable Tab on the right hand side.
The MTAs available to the ACP142 View are as configured in the Switch Operations View.
See the
M-Switch Administration Guide
for details on how to configure the Switch
Operations View.
You will also need to configure a suitable SASL Identity to connect to the Queue Manager
of a configured Switch. SASL Identities are configured using the Authenticated Entities
Management view or Internet Mailbox Management view (see
M-Switch Administration
Guide
).
Some parts of the ACP142 View also use the Audit DB features to return information about
previously transferred messages.
The selection of connected MTAs and Circuits appears as follows:
Once you have selected these, they will reconnect automatically and you can hide the left
hand side of this view using the "<" button.
ACP142 View
27
M-Switch Operator's Guide
