3
98-05267-EN R3
IC18 Sprayer/NH3 OEM options
Sensor Presence
Figure 1-4: Sensor Presence - Sprayer Mode
Figure 1-5: Sensor Presence - NH3 Mode
Figure 1-6: Implement Parameters - Sprayer Mode
Figure 1-7: Implement Parameters - NH3 Mode
Sensor Presence establishes sensors for Flow, Liquid Pressure, Fill Flow and the
Tank. If the fitted sensors are not registered here, the sensor options will not be
available in the calibration menus.
Flow Sensor
Flow Sensor sets the associated sensor availability to yes or no.
•
To set the Flow Sensor, select an option from the drop down menu or use the
UP/DOWN ARROWS to highlight the option.
Liquid Pressure Sensor
Liquid Pressure Sensor sets the associated sensor availability to yes or no.
•
To set the Liquid Pressure Sensor, select an option from the drop down menu
or use the UP/DOWN ARROWS to highlight the option.
Fill Flow Sensor (Sprayer Mode)
Fill Flow Sensor sets the associated sensor availability to yes or no. Available only
in Sprayer Mode.
•
To set the Fill Flow Sensor, select an option from the drop down menu or use
the UP/DOWN ARROWS to highlight the option.
Tank Sensor (Sprayer Mode)
Tank Sensor sets the associated sensor availability to yes or no. Available only in
Sprayer Mode.
•
To set the Tank Sensor, select an option from the drop down menu or use the
UP/DOWN ARROWS to highlight the option.
Implement Parameters
Implement Parameters establishes the Sprayer Mode, Number of Sections and if
there is tank Circulation.
Sprayer Mode
Sprayer Mode sets the implement parameter to either Crop Sprayer, Turf or NH3.
•
To set the Sprayer Mode, select an option from the drop down menu or use
the UP/DOWN ARROWS to highlight the option.
NOTE: When sprayer mode is changed, power must be cycled before all settings
will be displayed correctly.
Number of Sections
Number of Sections establishes how many sections are on the boom.
NOTE: The number established here affects options under Main -> Implement
Parameters -> Section Width -> Boom Section Width and on the
Operations Screen.
•
To set the Number of Sections, use the number pad or slide bar.
Circulation (Sprayer Mode)
Circulation sets if there is No, Semi or Full tank circulation. Available only in
Sprayer Mode.
•
To set the Circulation, select an option from the drop down menu or use the
UP/DOWN ARROWS to highlight the option.
NOTE: For this option to appear, Sprayer Mode must be set to Crop Sprayer.
