Iso ISOJET Cleaner 5, Руководство по эксплуатации

Страница: 9 / 14

DEUTSCH
FRANÇAIS
ENGLISH
Furthermore using the carbon brush Art No. K7000008 you are able to regulate the hardness
of the brush by moving the Tefl on housing. This can be especially useful for small welds in
tight areas.
Depending on the heat input during welding, you need to go over a number of times to remove
all the oxidation. The darker the weld, the longer the cleaning process. Burns that are ensured
due to high temperatures, lack of protective gasses etc. cannot be removed metallically as
they are no longer conductive. These have to be removed mechanically.
Take note of any excess running electrolytic solution. It can cause ugly runs. Excess electrolytic
solution can be removed from the work piece using the cloth and some water.
Because of the oxide residue, the weld is generally always cleaned with water. In special
applications, Carbon Cleaner 5 N using the pump spray can we used. This product neutralises
the electrolyte and increases the passivation process on the surface of the work piece.
Once dry, a stainless steel polishing fl uid such as MCT 800 can be applied. This product
effectively protects against dirt, fi ngerprints and other environmental infl uences in the area.
The chrome steel retains its shine.